PLUS wash basin bracket with lever control, manually height and sideways adjustable

EAN 5708590309415
ETIM EC010187
FDA ILW/D142473
GMDN 63052
HMI 71758
NBS N13:30,335
NRF 6132529
RSK 7972588
UNSPSC 42211600
VVS 654001510

R4580112

R4540

Wash basin brackets

PLUS wash basin bracket with lever control, manually height and sideways adjustable

PLUS wash basin brackets are available in electrically, pneumatically and manually height adjustable versions.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.

PLUS wash basin bracket. Manually height adjustable by 240 mm with lever control. Height and sideways adjustable. Recommendation: Flexible feed and waste system R2064/R2065. (UK markets R2074/R2075). Anthracite cover plate for vertical wall track.
Materials: Aluminium and ABS polymer.
Incl. fixing bolts for wash basin. For fitting to horizontal PLUS wall track (not included).

For fitting to horizontal PLUS wall track (not included).

Anthracite grey

A wash basin bracket is intended for optimum ergonomics at a wash basin, for both seated and standing users with disabilities.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.

Rasmus Thygesen

2011

The wash basin bracket is primarily made of 10-micrometre anodized aluminium. The ends of the bracket cover are capped with ABS polymer.

The wash basin bracket suits all types of bolt-mounted wash basin. Its rounded, sleek design greatly facilitates cleaning.

If the height of the wash basin only needs to be adjusted accasionally, a manually regulated wash basin bracket could be the best solution.
Adjustment involves supporting the weight of the basin and part of the bracket. Where frequent height adjustment is expected, use gas-assisted wash basin bracket R4680 or electrically operated wash basin bracket R478x, instead.

Maximum load: 135 kg.
Suitable for wash basins weighing no more than 22 kg.
When the wash basin is loaded with 135 kg, each wall fastener will be carrying 30 kg.
Wash basin brackets need to be able to carry the weight of the wash basin, as well as support the weight of the person who is leaning against the wash basin or who is using the wash basin to rise from seated position.
Neither wash basin nor wash basin bracket are intended to carry the full body weight of a person, and the test methods applicable to wash basin brackets reflect this: ISO 17966 prescribes a static test on the front edge of the wash basin at 75% of maximum user weight, i.e. when the maximum load on a wash basin bracket is given as 135 kg and the wash basin weighs 22 kg, it is – according to ISO 17966 – the equivalent of a user weighing 151 kg leaning on the front edge of the wash basin.

Height and sideways adjustable

240 mm

151 kg

135 kg

pcs

8.9 kg

9.736 kg

9.736 kg

24

1

24

PLUS & SELECT wash basin brackets.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

CE UK MDR This product is in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices.
For the UK: - Medical Device Regulation (MDR) 2002 on medical devices.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.