VALUE support arm, fixed height

Support arms

VALUE support arm, fixed, foldable, projection 850 mm.
The ergonomic design gives a secure and comfortable grip as well as a good sense of where the support arm ends.
Materials: Rilsan-coated steel, pressure-cast aluminium, plastic.
Incl. fixing bolts for brick wall. Plugs depend on wall type and must be ordered separately.

The support arm is manufactured from steel with a Rilsan coating, which is comfortable to the touch, easy to clean, and protects the metal against corrosion. The end caps are manufactured from nylon (PA).

White

Fixed mounting

Provides firm support when you are sitting, standing, or transferring to and from a toilet.

Good, broad support surface for the hand and arm.
The rounded form gives a firm and comfortable grip.

The support arm can fold up when not in use or to make more space.

2.62

VALUE support arms.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use corrosive or abrasive cleaners as it may result in the surface being damaged.
For surface disinfection, chlorine-based disinfectants may be used according to the product specification and safety precautions for these products.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Klorilli

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

Pressalit Care makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.

Maximum load: 120 kg.
When the support arm is loaded with 120 kg, each wall fastener is loaded with 242 kg.